- Doc
- TF-SS-HWK-A-01
- Rev
- A
- Issued
Product specification sheet · Quick install
Hardware Bag
The complete friction-clutch refresh
Every wear part in the clutch, in one bag, for one price. The fiber washers are the surface the clutch slips on — they are meant to be the thing that wears out.
P/NTF-D-HWK-01SKUTF-D-HWK-01RevA
| Fiber clutch washers | 2 |
|---|---|
| M4 flat washers | 2 |
| Lock nut | 1 |
| N52 encoder magnets | 2 |
| Shipping | Free within the U.S. |
Features
- One bag, whole job. Not a service call and not a parts hunt — everything the clutch consumes, bagged together.
- The designed failure point. The fiber washers are chosen to wear before the gears, the motor, or the blind do. That is the point.
- Magnets included. A fresh pair of N52 encoder magnets rides along, so a clutch rebuild and an encoder refresh are the same trip.
- Sets the slip torque. This stack is what decides when the drive gives up — at the end of travel, or when someone yanks the blinds.
- No special tools. A nut driver and your hands. The preload is set by feel, the way it was designed to be.
How to use it
Copy pendingInstall and use instructions for this part are being written against the final production build. The sheet format below is final — the steps are not written yet.
Assembly and installation steps for this part have not been published yet.
© 2026 TiltForge. All rights reserved. TiltForge and the TiltForge gear mark are trademarks of TiltForge. Specifications are subject to change without notice — this sheet documents Rev A, and the current revision is always at https://www.tiltforge.com/p/hardware.